Skip to content
Get PremiumSign in

Types of bones

Classification of bone types, structure, and development mechanisms.

  • 20 min read
  • Last verified
  • Checked against sources

Definitions

Parts of a long bone

A long bone comprises two principal regions: the diaphysis and the epiphysis. The diaphysis is the tubular shaft running between the proximal and distal ends. Its hollow interior is the medullary cavity, filled with yellow marrow. The walls consist of dense, hard compact bone. The epiphyses are the wider sections at each end, filled with spongy bone and red marrow. [3]

Bone markings and landmarks

Bone markings vary by function and location. They fall into three classes: articulations, projections, and holes. An articulation is where two bone surfaces meet to form a joint. Projections stick out from the surface, providing attachment points for tendons and ligaments. Holes are openings or grooves allowing blood vessels and nerves to enter the bone. [3]

Blood supply of bone

Bone is a dynamic tissue requiring constant nutrient supply. The periosteum is a fibrous membrane covering the outer surface, except where articular cartilage is present. The endosteum is a delicate membranous lining of the medullary cavity. Vessels enter through holes in the bone markings. [3]

Ossification centres and growth

Ossification is the process of bone formation. Most appendicular bones develop via endochondral ossification, converting a hyaline cartilage model into bone. This begins in most appendicular bones by the twelfth fetal week. A primary ossification center appears in the diaphysis, followed by secondary centers in the epiphyses. The epiphyseal plate, a layer of hyaline cartilage, allows for bone lengthening. Disappearance of this plate leads to fusion into a single adult bone. [1]

DefinitionIntramembranous Ossification

Bone develops directly from sheets of mesenchymal connective tissue without a cartilage intermediate.

The clavicle is the unique appendicular bone developing via intramembranous ossification. Mesenchymal cells differentiate directly into bone-producing cells. Ossification centers appear during the fifth week of development, making it the first bone to begin ossification. However, ossification is not complete until age 25. [1]

Axial and appendicular skeleton

The skeleton is divided into axial and appendicular components. The axial skeleton includes the skull, vertebral column, and thoracic cage. The skull bones arise via intramembranous ossification. At birth, these are separated by fontanelles, wide areas of fibrous connective tissue. These reduce to sutures as the skull grows. The cranial base and facial bones form via endochondral ossification. [2] [4]

Variation and accessory bones

Bone structure allows for visualization of parts. Flat bones consist of two layers of compact bone surrounding a layer of spongy bone. Bone modeling allows bones to grow in diameter. Remodeling occurs as bone is resorbed and replaced by new bone. About 5 to 10 percent of the skeleton is remodeled annually. [3] [4]

Classification

Bones are classified by shape into long, short, flat, irregular, and sesamoid categories. This morphological classification correlates with their mechanical function and internal structure. Long bones are characterised by a shaft and two ends, designed for leverage and movement. Short bones provide stability and limited motion. Flat bones offer protection and broad surfaces for muscle attachment. Irregular bones have complex shapes that do not fit other categories. Sesamoid bones develop within tendons.

Classification of bones by shape and examples
ShapeDescriptionExamples
LongShaft and two ends; leverageFemur, humerus
ShortCube-like; stabilityCarpals, tarsals
FlatThin and curved; protectionSternum, ribs, scapula
IrregularComplex shapeVertebrae, facial bones
SesamoidWithin tendonsPatella

The functions of bone extend beyond structural support. Bone provides a framework for the body, protecting vital organs such as the brain and heart. It serves as an attachment point for muscles, enabling movement. Bone acts as a reservoir for minerals, particularly calcium and phosphate. It also houses bone marrow, which produces blood cells. The hardness of bone is essential for these functions, allowing it to withstand stress. Bone is dynamic, adjusting its shape to accommodate mechanical stresses. [3]

Bone tissue differs from other tissues due to its hardness and dynamic nature. It consists of cells and extracellular matrix. The cells include osteoblasts, osteocytes, osteogenic cells, and osteoclasts. Although bone cells compose a small amount of the bone volume, they are crucial to the function of bones. Compact bone is the denser, stronger type of bone tissue. It is found under the periosteum and in the diaphyses of long bones, where it provides support and protection. Holes are openings or [3]

Embryologically, bones arise from mesenchyme, a type of embryonic tissue that can differentiate into many types of tissues, including bone or muscle tissue. Mesenchyme gives rise to the bones of the upper and lower limbs, as well as to the pectoral and pelvic girdles. Development of the limbs begins near the end of the fourth embryonic week, with the upper limbs appearing first. Thereafter, the development of the upper and lower limbs follows similar patterns, with the lower limbs lagging behind the upper limbs by a few days. [1]

All of the girdle and limb bones, except for the clavicle, develop by the process of endochondral ossification. This process begins as the mesenchyme within the limb bud differentiates into hyaline cartilage to form cartilage models for future bones. By the twelfth week, a primary ossification center will have appeared in the diaphysis (shaft) region of the long bones, initiating the process that converts the cartilage model into bone. A secondary ossification center will appear in each epiphysis (expanded end) of these bones at a later time, usually after birth. The primary and secondary ossification centers are separated by the epiphyseal plate, a layer of growing hyaline cartilage. This plate is located between the diaphysis and each epiphysis. It continues to grow and is responsible for the lengthening of the bone. [1] [2][3]

Small bones, such as the phalanges, will develop only one secondary ossification center and will thus have only a single epiphyseal plate. Large bones, such as the femur, will develop several secondary ossification centers, with an epiphyseal plate associated with each secondary center. Thus, ossification of the femur begins at the end of the seventh week with the appearance of the primary ossification center in the diaphysis, which rapidly expands to ossify the shaft of the bone prior to birth. Secondary ossification centers develop at later times. Ossification of the distal end of the femur, to form the condyles and epicondyles, begins shortly before birth. Secondary ossification centers also appear in the femoral head late in the first year after birth, in the greater trochanter during the fourth year, and in the lesser trochanter between the ages of 9 and 10 years. [1]

Bones continue to grow in length until early adulthood. The rate of growth is controlled by hormones, which will be discussed later. When the chondrocytes in the epiphyseal plate cease their proliferation and bone replaces the cartilage, longitudinal growth stops. All that remains of the epiphyseal plate is the epiphyseal line. [4]

At birth, the brain case and orbits of the skull are disproportionally large compared to the bones of the jaws and lower face. This reflects the relative underdevelopment of the maxilla and mandible, which lack teeth, and the small sizes of the paranasal sinuses and nasal cavity. During early childhood, the mastoid process enlarges, the two halves of the mandible and frontal bone fuse together to form single bones, and the paranasal sinuses enlarge. The jaws also expand as the teeth begin to appear. These changes all contribute to the rapid growth and enlargement of the face during childhood. [2]

The bones of the skull arise from mesenchyme during embryonic development in two different ways. The first mechanism produces the bones that form the top and sides of the brain case. This involves the local accumulation of mesenchymal cells at the site of the future bone. These cells then differentiate directly into bone producing cells, which form the skull bones through the process of intramembranous ossification. As the brain case bones grow in the fetal skull, they remain separated from each [2][4]

The largest fontanelle is located on the anterior head, at the junction of the frontal and parietal bones. The fontanelles decrease in size and disappear by age 2. However, the skull bones remained separated from each other at the sutures, which contain dense fibrous connective tissue that unites the adjacent bones. The connective tissue of the sutures allows for continued growth of the skull bones as the brain enlarges during childhood growth. [2]

During intramembranous ossification, compact and spongy bone develops directly from sheets of mesenchymal (undifferentiated) connective tissue. The flat bones of the face, most of the cranial bones, and the clavicles (collarbones) are formed via intramembranous ossification. Intramembranous ossification begins in utero during fetal development and continues on into adolescence. At birth, the skull and clavicles are not fully ossified nor are the sutures of the skull closed. This allows the skull and shoulders to deform during passage through the birth canal. The last bones to ossify via intramembranous ossification are the flat bones of the face, which reach their adult size at the end of the adolescent growth spurt. [4]

In a long bone, for example, at about 6 to 8 weeks after conception, some of the mesenchymal cells differentiate into chondrocytes (cartilage cells) that form the cartilaginous skeletal precursor of the bones. Soon after, the perichondrium, a membrane that covers the cartilage, appears. [4]

Features and examples

To understand bone types, one must first appreciate their embryological origins and structural composition. The axial skeleton begins with the notochord, followed by somites that split into sclerotomes, which are mesenchymal tissues destined to become bone. In contrast, the appendicular skeleton arises from limb buds stimulated by the apical ectodermal ridge, where mesenchyme differentiates into hyaline cartilage models. [1][2]

Structurally, bones are classified by shape: long, short, flat, irregular, and sesamoid. Long bones, such as the femur, feature a diaphysis and epiphyses. The diaphysis contains a medullary cavity lined by the endosteum, where bone growth and repair occur. The outer surface is covered by the periosteum, a fibrous membrane containing blood vessels and nerves that nourish compact bone. At the joints, epiphyses are covered by articular cartilage, a thin layer that reduces friction and acts as a shock absorber. [3]

The mechanical strength of bone derives from its composite nature. Collagen fibers provide flexibility, preventing brittleness, while hydroxyapatite crystals, formed from calcium phosphate and carbonate, provide hardness. This matrix houses osteocytes within lacunae. Osteogenic cells develop into osteoblasts, which make new bone, while osteoclasts engage in bone resorption. [3]

Histological and Structural Differences
FeatureCompact BoneSpongy (Cancellous) Bone
DensityDenseLess dense
StructureComposed of osteonsMade up of trabeculae
FunctionWithstands compressive forcesSupports shifts in weight distribution
MarrowN/AContains red marrow for hematopoiesis

Most bones contain both compact and spongy tissue. Compact bone is dense to withstand compressive forces, whereas spongy bone has open spaces that support shifts in weight distribution. Spongy bone, also known as cancellous bone, contains osteocytes in a lattice-like network of matrix spikes called trabeculae. These trabeculae form along lines of stress to provide strength, while their spaces make bones lighter for easier muscle movement. Some spongy bones contain red marrow, protected by trabeculae, where hematopoiesis occurs. [3]

Flat bones, like those of the cranium, consist of a layer of diploë (spongy bone) lined on either side by compact bone. This structure protects internal organs; if the outer layer fractures, the intact inner layer still protects the brain. [3]

Bone Growth Mechanisms

  1. Bone GrowthLongitudinal vs Appositional
  2. Question: Type of Growth?
    • Longitudinal

      1. Epiphyseal PlateHyaline cartilage layer
      2. Question: Activity?
        • Epiphyseal Side

          1. Cartilage FormationChondrocytes
        • Diaphyseal Side

          1. Cartilage OssificationDiaphysis grows in length
A teaching outline, not a protocol.

Long bones increase in length via the epiphyseal plate, a layer of hyaline cartilage where ossification occurs in immature bones. On the epiphyseal side, cartilage is formed, while on the diaphyseal side, cartilage is ossified, allowing the diaphysis to grow in length. [3][4]

While bones increase in length, they also increase in diameter through appositional growth, which can continue after longitudinal growth ceases. Osteoclasts resorb old bone lining the medullary cavity, while osteoblasts produce new bone tissue beneath the periosteum via intramembranous ossification. This modeling process increases both the diameter of the diaphysis and the medullary cavity. [4]

The diaphysis is central, containing the medullary cavity lined by endosteum. The epiphyses are at the ends, covered by articular cartilage. The periosteum covers the outer diaphysis.

The outer and inner compact layers sandwich the spongy diploë, demonstrating the protective architecture.

Clinical relevance

The structural integrity of the skeleton relies on the precise replacement of temporary templates with permanent mineralised tissue. Bone is fundamentally a replacement tissue, meaning it deposits its mineral matrix onto a pre-existing model. For the majority of the skeletal framework, this template is cartilage. During fetal development, a flexible, semi-solid matrix is established to determine the future location of bones. This matrix is produced by chondroblasts and comprises hyaluronic acid, chondroitin sulfate, collagen fibers, and water. As these cells become embedded within the matrix they are reclassified as chondrocytes. [4]

A critical physiological constraint of this cartilaginous template is its avascularity. Unlike most connective tissues, cartilage lacks blood vessels to supply nutrients or remove metabolic waste. Consequently, all metabolic exchange occurs via diffusion through the matrix. This structural limitation explains why damaged cartilage does not repair itself as readily as other tissues. Understanding this dependency on diffusion is essential when considering the poor healing potential of articular cartilage injuries in adults. [4]

The formation of the axial skeleton begins early in gestation. During the third week of embryonic development, a rod-like structure known as the notochord develops dorsally along the embryo’s length. The mesoderm tissue located on either side of the notochord thickens and separates into a repeating series of block-like structures called somites. Each somite splits into several parts, the most medial of which is the sclerotome. The sclerotomes consist of mesenchyme, an embryonic tissue that gives rise to the fibrous connective tissues, cartilages, and bones of the body. This mesenchymal origin is crucial for the subsequent ossification of the vertebral column. [2]

In the limbs, development follows a distinct morphological sequence. During the sixth week, the distal ends of the upper and lower limb buds expand and flatten into a paddle shape. This region will eventually become the hand or foot. Constrictions then appear at the wrist or ankle areas, followed by a second constriction at the future elbow or knee. Within the paddle, targeted cell death produces the separations between the growing fingers and toes. Simultaneously, mesenchyme within these buds differentiates into hyaline cartilage, forming the initial models of the future limb bones. [1]

Growth in length is driven by the persistence of cartilage at specific sites. While the diaphyses undergo ossification, chondrocytes and cartilage continue to grow at the ends of the bone, known as the future epiphyses. By the time the fetal skeleton is fully formed, cartilage remains only at the joint surfaces as articular cartilage and between the diaphysis and epiphysis as the epiphyseal plate. The epiphyseal plate is the structure responsible for the longitudinal growth of bones. After birth, secondary ossification centres appear in the epiphyseal regions, involving matrix mineralization, chondrocyte death, and invasion by blood vessels from the periosteum. [4]

Clinical pearlAvascularity

Cartilage is avascular, relying on diffusion for metabolism, which limits its repair capacity.

Key Developmental Structures
StructureOrigin/TimingFunction
NotochordWeek 3Axial support; induces neural tube
SclerotomeWeek 4Forms vertebrae and ribs
Limb PaddleWeek 6Forms hands and feet
Epiphyseal PlateFetal to AdultLongitudinal bone growth

Exam pearls

Bone development follows two distinct pathways, yet the final tissue is identical. In early embryonic life, the skeleton comprises fibrous membranes and hyaline cartilage. Ossification, or osteogenesis, initiates during the sixth or seventh week of embryonic life. The two primary osteogenic pathways are intramembranous ossification and endochondral ossification. Despite the different origins, bone is the same regardless of the pathway that produces it. [4]

The ribs and sternum develop from mesenchyme. Ribs initially form as part of the cartilage model for each vertebra. In the thorax region, the rib portion separates from the vertebra by the eighth week. The cartilage model of the rib ossifies, except for the anterior portion which remains as costal cartilage. The sternum forms as paired hyaline cartilage models on either side of the anterior midline. This process begins during the fifth week of development. The rib cartilage models attach to the lateral sides of the developing sternum. The two halves of the cartilaginous sternum fuse along the midline and then ossify. The manubrium and body of the sternum convert to bone first. The xiphoid process remains as cartilage until late in life. [2]

Osteoblasts are the bone cells responsible for forming new bone. They are found in growing portions of bone, including the periosteum and endosteum. Osteoblasts do not divide and synthesize the collagen matrix and calcium salts. As the secreted matrix calcifies, the osteoblast becomes trapped within it. It changes structure to become an osteocyte, the primary cell of mature bone. Osteocytes are the most common type of bone cell. Each osteocyte resides in a space called a lacuna. They are surrounded by bone tissue. Osteocytes maintain the mineral concentration of the matrix via enzyme secretion. Like osteoblasts, osteocytes lack mitotic activity. They communicate and receive nutrients via long cytoplasmic processes. These processes extend through canaliculi, which are channels within the bone matrix. [4] [3]

Common traps include confusing the timing of sternum fusion with rib separation. The sternum fuses along the midline after attachment, not before. Another trap is assuming osteoblasts divide; they do not. Osteocytes are mature, trapped cells, not active builders. The xiphoid process is cartilage in adults, not bone. Ribs separate from vertebrae by week eight, not week five. The sternum formation starts at week five, not week eight. Osteogenesis begins at week six or seven, not week four. The two pathways produce identical bone tissue, not different types. Osteocytes maintain minerals, they do not form new bone.

Exam trapSternal Development

The xiphoid process remains cartilage until late in life, unlike the manubrium and body which ossify early.

DefinitionOsteocyte

The primary cell of mature bone, trapped in a lacuna, maintaining mineral concentration via enzyme secretion.

NoteOssification Pathways

Intramembranous and endochondral ossification are the two pathways, but bone is the same regardless of the pathway.

Common pitfalls

Students frequently confuse the developmental origins of different skeletal elements, leading to errors in understanding ossification timelines. A primary mistake is assuming all bones form through the same process. The clavicle is unique because it develops via intramembranous ossification, where mesenchyme is converted directly into bone tissue. This process begins during the fifth week of development and continues until 25 years of age. In contrast, most other bones, particularly those in the limbs, form through endochondral ossification involving a cartilage model. Failing to distinguish these two mechanisms leads to incorrect assumptions about when and how specific bones mature. [1]

Another significant error involves the interpretation of radiographs in paediatric patients. The epiphyseal plate is a layer of hyaline cartilage in a growing bone. Since the cartilage of an epiphyseal plate is less dense than bone, the plate will appear dark in a radiograph image. Consequently, a normal epiphyseal plate may be mistaken for a bone fracture. Students must remember that this radiolucent line represents normal growth potential, not pathology. The epiphyseal plate is retained for many years, until the bone reaches its final, adult size, at which time the epiphyseal plate disappears and the epiphysis fuses to the diaphysis. [1]

Misunderstanding the sequence of epiphyseal fusion is also common. Once these areas have ossified, their fusion to the diaphysis and the disappearance of each epiphyseal plate follow a reversed sequence. For the femur, the lesser trochanter is the first to fuse, doing so at the onset of puberty (around 11 years of age). This is followed by the greater trochanter approximately 1 year later. The femoral head fuses between the ages of 14–17 years. The distal condyles of the femur are the last to fuse, between the ages of 16–19 years. Confusing this order can lead to incorrect assessments of skeletal maturity. [1]

Students often overlook the anatomical changes due to limb rotation. The early outgrowth of the upper and lower limb buds initially has the limbs positioned so that the regions that will become the palm of the hand or the bottom of the foot are facing medially toward the body. During the seventh week of development, the upper limb rotates laterally by 90 degrees, so that the palm of the hand faces anteriorly and the thumb points laterally. In contrast, the lower limb undergoes a 90-degree medial rotation, thus bringing the big toe to the medial side of the foot. Forgetting this rotation results in incorrect descriptions of anatomical position and relations. [1]

Finally, confusion regarding the microscopic structure of compact bone can obscure understanding of bone physiology. The microscopic structural unit of compact bone is called an osteon, or Haversian system. Each osteon is composed of concentric rings of calcified matrix called lamellae. Running down the center of each osteon is the central canal, or Haversian canal, which contains blood vessels, nerves, and lymphatic vessels. These vessels and nerves branch off at right angles through a perforating canal, also known as Volkmann’s canals, to extend to the periosteum and endosteum. Neglecting this architecture makes it difficult to appreciate how nutrients reach osteocytes. [3]

Where it is used in practice

This knowledge is applied at the bedside when assessing growth and development. Knowledge of the age at which different epiphyseal plates disappear is important when interpreting radiographs taken of children. Clinicians use the presence or absence of these plates to estimate skeletal age, which is crucial in cases of suspected abuse or endocrine disorders. The epiphyseal plate is retained for many years, until the bone reaches its final, adult size. When the bone stops growing in early adulthood (approximately 18–21 years), the cartilage is replaced by osseous tissue and the epiphyseal plate becomes an epiphyseal line. Recognising this transition helps in diagnosing growth plate injuries, which are distinct from fractures in adults. [1] [3]

In the operating theatre, understanding bone development is vital for surgical planning. The axial skeleton begins to form during early embryonic development[1]. However, growth, remodeling, and ossification continue for several decades after birth before the adult skeleton is fully formed[1]. Knowledge of the developmental processes that give rise to the skeleton is important for understanding the abnormalities that may arise in skeletal structures[1]. Surgeons must account for the fact that the clavicle continues to ossify until 25 years of age, which can influence fixation strategies in young adults. Additionally, the rotation of limbs during development dictates the anatomical orientation of muscles and nerves, ensuring correct surgical approaches. [2]

On imaging, the distinction between cartilage and bone is critical. The epiphyseal plate is a layer of hyaline cartilage in a growing bone. Since the cartilage of an epiphyseal plate is less dense than bone, the plate will appear dark in a radiograph image. Radiologists must differentiate this normal radiolucency from pathological fractures. Furthermore, the spongy bone and medullary cavity receive nourishment from arteries that pass through the compact bone. The arteries enter through the nutrient foramen, small openings in the diaphysis. Understanding this vascular supply helps in interpreting bone scans and identifying areas of avascular necrosis or infection. [3]

In examinations, students are tested on the microscopic and macroscopic organisation of bone. The osteocytes are located inside spaces called lacunae. As described earlier, canaliculi connect with the canaliculi of other lacunae and eventually with the central canal. This system allows nutrients to be transported to the osteocytes and wastes to be removed from them. In addition to the blood vessels, nerves follow the same paths into the bone where they [3]

Epiphyseal Fusion Sequence

  1. Start: Assess RadiographIdentify epiphyseal plates
  2. Question: Plate present?
    • Yes

      1. Normal GrowthCartilage is radiolucent
    • No

      1. Question: Age < 11?
        • Yes

          1. Check Lesser TrochanterFirst to fuse
        • No

          1. Question: Age 11-12?
            • Yes

              1. Check Greater TrochanterFuses ~1 year after lesser
            • No

              1. Question: Age 14-17?
                • Yes

                  1. Check Femoral HeadFuses 14-17 years
                • No

                  1. Check Distal CondylesLast to fuse 16-19 years
A teaching outline, not a protocol.

Key points

  • Long bones consist of a diaphysis containing a medullary cavity and epiphyses filled with spongy bone and red marrow.
  • Bones are classified by shape into long, short, flat, irregular, and sesamoid categories, each correlating with a specific mechanical function.
  • Endochondral ossification converts a hyaline cartilage model into bone, while intramembranous ossification develops bone directly from mesenchymal connective tissue. [4]
  • The clavicle is the only appendicular bone that develops via intramembranous ossification, beginning in the fifth week of development.
  • Bone growth occurs longitudinally at the epiphyseal plate and in diameter through appositional growth.
  • The bone matrix combines collagen fibers for flexibility and hydroxyapatite crystals for hardness.
  • Osteoblasts synthesize the bone matrix, while osteocytes reside in lacunae and maintain the mineral concentration of the matrix.
  • Cartilage is avascular and relies on diffusion for metabolic exchange, which limits its ability to repair itself.

Check yourself

Answer each one in your head first, then open the answer.

  1. Why is the clavicle considered unique among appendicular bones

    Show answerHide answer
    It is the only appendicular bone that develops via intramembranous ossification rather than endochondral ossification.
  2. Why might a radiologist mistake a normal epiphyseal plate for a fracture in a pediatric patient

    Show answerHide answer
    The hyaline cartilage of the epiphyseal plate is less dense than bone, causing it to appear as a dark, radiolucent line on a radiograph.
  3. How do osteocytes receive nutrients and communicate despite being trapped in a calcified matrix

    Show answerHide answer
    They use long cytoplasmic processes that extend through small channels called canaliculi to reach other lacunae and the central canal.
  4. What structural characteristic of cartilage explains its poor capacity for self-repair compared to other tissues

    Show answerHide answer
    Cartilage is avascular, meaning it lacks blood vessels and must rely on diffusion through the matrix for all metabolic exchange.
  5. How does a bone increase its diameter during appositional growth

    Show answerHide answer
    Osteoblasts deposit new bone tissue beneath the periosteum while osteoclasts resorb old bone lining the medullary cavity.

References

  1. Betts JG, Young KA, Wise JA, et al. Development of the Appendicular Skeleton. OpenStax, Anatomy and Physiology 2e (CC BY-NC-SA 4.0). Accessed .
  2. Betts JG, Young KA, Wise JA, et al. Embryonic Development of the Axial Skeleton. OpenStax, Anatomy and Physiology 2e (CC BY-NC-SA 4.0). Accessed .
  3. Betts JG, Young KA, Wise JA, et al. Bone Structure. OpenStax, Anatomy and Physiology 2e (CC BY-NC-SA 4.0). Accessed .
  4. Betts JG, Young KA, Wise JA, et al. Bone Formation and Development. OpenStax, Anatomy and Physiology 2e (CC BY-NC-SA 4.0). Accessed .

Educational content for medical students and doctors. It is not a substitute for clinical judgement or local guidelines.